Shimano BT-DN300 DI2 Internal Battery

The BT-DN300 Battery by Shimano - The power source for your Di2 shifting system
The BT-DN300 is a lithium-ion battery developed by Shimano for the Dura-Ace and Ultegra Di2 2x12-speed road groupsets. Like its predecessor, it is installed internally in the frame, typically in the seatpost. It has three connections and supplies power to all electronic components via the thin EW-SD300 power cable (not included): the rear derailleur, the front derailleur and, in a fully wired set-up, the two shift/brake levers. Unlike previous models, BT-DN300 does not have its own charging socket, but is charged via the rear derailleur. It is also not Bluetooth-enabled. The nominal voltage of the battery is 7.4 volts, the nominal capacity 500 mAh. A full charge takes up to 1.5 hours if the charging cable is connected to a power supply unit with a USB port, or up to 3 hours if it is connected to the USB port on a computer. Once charged, you can ride your shifters for approx. 1000 km. Blind plugs and small parts required for installation are included.


SPECIFICATIONS
Type: Lithium-ion battery
Voltage: 7.4V
Energy Quantity: 3.7 Wh
Capacity: 500 mAh
Charge Time: 1.5 - 3 h



COMPATIBILITY

Shifters & Derailleurs: Dura-Ace Di2 R9250, Ultegra Di2 R8150, 105 Di2 R7150
Power Cable: EW-SD300-I (3 x connection)
Charger: RD-R9250, RD-R8150, RD-R7150 (rear derailleurs)
Charging Cable: EW-EC300



FEATURES

- Internal installation in the seatpost
- Waterproof design
- Firmware updates via E-Tube Project
- Charging time 1.5 h via USB line power adapter, 3 h via computer USB
- Running time approx. 1000 km
- Operating temperature -10 degreeC to 50 degreeC
- Charging temperature 0 degreeC to 45 degreeC

Weight: 52 g